By JEFF FERREYLEALE, ESPN Staff WriterESPN.com/SI The Led nail lamp.
It has the ability to make up to 40 LED lights per night.
The Led LED nail light.
It comes in two sizes: a standard size and a small one.
It has a base of about 20 LED lights and a wide base to fit in the palm of your hand.
Here’s what you need to do to make one yourself.1.
Cut out the pattern.
You need to cut out a pattern that looks like the one on the photo below.2.
Cut a strip of LED strips in half.
For this, you want to cut the strip in half so that it’s just a single strip.3.
Cut each strip into four equal pieces.
The pieces will then need to be cut into 4 equal segments, and the 4 segments should form a square.4.
Lay the strips in a single row on a table.
Now, start by tracing around the perimeter of each piece.
As you trace around, keep making the square.
When you’re finished, lay the strips on the table.5.
Drill a hole through the center of each strip.
If you’re not sure where the hole should go, just cut a strip off one side of the strip and trace it out on the other side of your strip.6.
Place a nail on the strip, then screw the nail on securely.7.
Turn on the lamp.
If the lamp works, it should go on and off at the exact same time.8.
If not, turn it off.
Repeat until the lamp is turned off.